SharperTek® Heated Ultrasonic Carburetor Cleaning System SH720-10G: Extra Powerful Cleaning Machine
The SH720-10G Ultrasonic Carburetor Cleaning System is great for cleaning large, heavily soiled carburetors. Ultrasonic cleaners are the ideal method of cleaning carburetors. Since the ultrasonic waves can reach into even the smallest crevices, ultrasonic cleaning machines can clean carburetors even more thoroughly than spray wash systems. With a strong alkaline degreasing chemical, such as our 1220 Degreaser/Carburetor Cleaner, the SH720-10G Ultrasonic Carburetor Cleaning System can quickly remove heavy grease and varnish buildup from carburetors.
How to Clean Carburetors Using an Ultrasonic Cleaning System:
In order to clean carburetors thoroughly, the ultrasonic cleaning machines must be used with a degreasing chemical. Our 1220 Degreaser/Carburetor Cleaner is a very powerful degreaser that cleans thoroughly and quickly. Furthermore, the 1220 Degreaser/Carburetor Cleaner concentrate dilutes to 20 gallons! That means the 1220 Degreaser/Carburetor Cleaner will last for a few cleanings in the 10 gallon tank of the SH720-10G. The 1220 Degreaser/Carburetor Cleaner, combined with our powerful SH720-10G ultrasonic cleaning machine, is a potent system for cleaning any kind of carburetor!
We recommend the Shellac-Buster for cleaning Shellac and Varnish off of carburetors. The Shellac-Buster chemical never dies! You can use the Shellac-Buster chemical forever by either adding more to it when it evaporates or by alternating by adding water. When it gets dirty you can clean it by straining it in a cheese cloth.
SH720-10G 36 Liters Ultrasonic Cleaner Specifications:
1 Quart Jewelry Cleaner Solution
Don't forget to order jewelry cleaner solution with the silver cleaning plate when you purchase an ultrasonic machine! To get the most out of your SharperTek ultrasonic cleaner, we suggest using SharperTek Jewelry Cleaning Solution. SharperTek’s jewelry cleaning solution can be used at several different dilution rates for your lightest cleaning to the heaviest of dirts. SharperTek recommends a mix ration of 20:1 for most applications. SharperTek’s jewelry cleaning solution can be used with a wide range of ultrasonic cleaners, and it can also be used for glass and general cleaning. SharperTek jewelry cleaning solution is recommended for removing dirt, grease and light oils from cleaning instruments, various metal parts and jewelry. Each quart bottle of SharperTek jewelry cleaning solution can be diluted to make up to 40 quarts.
|
SILVER CLEANING PLATE |
|
1 Quart Jewelry Cleaner Solution with Silver Cleaning Plate
Don't forget to order jewelry cleaner solution with the silver cleaning plate when you purchase an ultrasonic machine! To get the most out of your SharperTek ultrasonic cleaner, we suggest using SharperTek Jewelry Cleaning Solution. SharperTek’s jewelry cleaning solution can be used at several different dilution rates for your lightest cleaning to the heaviest of dirts. SharperTek recommends a mix ration of 20:1 for most applications. SharperTek’s jewelry cleaning solution can be used with a wide range of ultrasonic cleaners, and it can also be used for glass and general cleaning. SharperTek jewelry cleaning solution is recommended for removing dirt, grease and light oils from cleaning instruments, various metal parts and jewelry. Each quart bottle of SharperTek jewelry cleaning solution can be diluted to make up to 40 quarts.
Use the SHARPERTEK® silver cleaning plate with the SHARPERTEK® cleaning solution to clean tarnished silver jewelry. Simply place this plate in the basket with the cleaning solution along with your silver jewelry and turn the machine on, and your silver will be cleaned in just 3 minutes. This plate is a must if you own any silver jewelry.
Customer Service and Sales: 248-340-0342
SC20 Degreaser / Carburetor Cleaner
This cleaning solution is an alkaline degreaser that can remove the heaviest grease accumulations. The powerful oil-splitting and grease separation capabilities make it ideal for cleaning heavily soiled mechanical parts such as carburetors and injectors. This cleaner works well on both ferrous and non-ferrous alloys, and was designed specifically for use with ultrasonic cleaners. Not only is it capable of dispersing large amounts of particulate and solids, but also splitting oil out of solution, thus greatly extending cleaning solution life. Special sequestering agents help prevent scale build up in machines.
Usage and Dilution Recommendations:
Dilute 4 to 10 ounces per gallon of water (approx. 5%). When cleaning brass, solution operating temperature should not exceed 130º F (55º C) to maintain optimum brightness. For heavy cleaning, solution may be used at up to 160º F (65º C).
| Physical and Chemical Properties | |
| Physical State | Aqueous-based liquid |
| Appearance | Green, Non-Viscous |
| Odor | Very Mild |
| Solubility in Water | 100% |
| pH of Concentration | 12 |
| pH at 1% Solution | 10.4 |
| Specific Gravity | 1.05 |
| Volatile by Weight | 0% |
| Boiling Point | >212º F |
| Vapor Pressure and Density | As water |
Handling and Storage
This is a non-combustible alkaline liquid. Use good industrial hygiene practices such as wearing chemical safety goggles, rubber gloves, impermeable apron, and rubber boots as necessary to avoid personal contact with this product. In case of contact, flush eyes and/or skin with plenty of water for at least 15 minutes. Consult physician and remove contaminated clothing promptly. Store product in tightly closed containers between 50° and 85° F. Rotate stock. When stored as stated above, shelf life is a minimum of 2 years.
MSDS:
Refer to our material safety data sheet for more information.
SC31 Ultrasonic Cleaning Solution Concentrate
Presenting our SC31 Concentrate: a mild, organic acid product which safely and efficiently removes grim, scale, and oxides from ferrous and nonferrous metals, resulting in a deep reflective finish. Formulated for use in ultrasonic cleaning systems, SC31 not only removes corrosion, but it helps preventing parts from corroding after cleaning.
The days of using strong, hazardous, and corrosive inorganic acid cleaners are gone with the introduction of SC31 Cleaning Concentrate.
| PHYSICAL PROPERTIES | |
| Appearance: | Orange Liquid |
| pH @ 1% solution: | 4.8 |
| Odor: | Mild |
| Foaming action: | Controlled |
| Solubility in water: | Complete |
| Rinsing action: | Excellent |
| Metal Safety: | All Metals |
USAGE & DILUTION RECOMMENDATIONS
For stripping metal oxides from parts in soak tanks or ultrasonic cleaning applications, use 9 ounces per gallon of water (7% solutions). Concentrations higher than 7% will not work more efficiently. Solution temperature should be maintained between 130° F and 140° F. We recommend the use of a quality ultrasonic unit for highest efficiency. Rust and scale can normally be removed in 30
seconds to 2 minutes. The same concentrations may be used for passivation of stainless steel.
HANDLING & STORAGE
This product does not pose any fire hazards. Use good industrial hygiene practices such as wearing rubber gloves and an impermeable apron to protect sensitive skin. Chemical safety goggles should be worn to protect eyes. If eye contact occurs, flush with plenty of water for at least 15 minutes and consult a physician. In case of skin contact, wash with soap and water, removing contaminated clothing and shoes. Keep product containers tightly closed when not in use. Store in the original container between 45° and 85°F. When stored as above, shelf life is a minimum of 2 years.
Refer to our Material Safety Data Sheet for additional information.
Customer Service and Sales: 248-340-0342
SC52 CLEANING CONCENTRATE
SC52 Cleaning Concentrate is a moderately acidic product formulated to strip metal oxides and metallic coatings. It is intended for use in soak tanks or ultrasonic cleaning systems.
Features:
USAGE & DILUTION RECOMMENDATIONS
For stripping metal oxides, from metal parts in soak tanks or ultrasonic cleaning applications, use 9 ounces per gallon of water (7% solutions). Concentrations higher than 7% will not work efficiently. Solution temperature should not exceed 160°- 170° F. Rust and scale can normally be removed in 30 seconds to 2 minutes.| PHYSICAL PROPERTIES | |
| Appearance: | Blue Liquid |
| pH @ 1% solution: | 4.8 |
| Odor: | Mild |
| Foaming action: | Controlled |
| Solubility in water: | Complete |
| Rinsing action: | Excellent |
| Metal Safety: | All Metals |
| Flash Point: | None |
| Specific Gravity: | 1.152 |
| Stability: | Stable |
HANDLING & STORAGE
This product does not pose any fire hazards. Use good industrial hygiene practices such as wearing rubber gloves and an impermeable apron to protect sensitive skin. Chemical safety goggles should be worn to protect eyes. If eye contact occurs, flush with plenty of water for at least 15 minutes and consult a physician. In case of skin
contact, wash with soap and water, removing contaminated clothing and shoes. Keep product containers tightly closed when not in use. Store in the original container between 45° and 85°F. When stored as above, shelf life is a minimum of 2 years.
SC-44 CLEANING CONCENTRATE
This product is a concentrated neutral pH non-butyl degreaser which removes the heaviest of grease accumulations. Contains no phosphates, silicates, solvents, or chelating agents. Low-foaming for automatic scrubbers and spray cabinets. Oil-splitting for easy oil
and grease separation. High degree of product recovery in ultra filtration systems.
USAGE & DILUTION RECOMMENDATIONS
Dilute 4 to 6 ounces per gallon for general degreasing and routine maintenance. Use at 130-140°F in aqueous parts washers, spray cabinets and ultrasonic units. If corrosion protection is desirable, do not rinse. If residue-free parts are required, rinse with water.
| PHYSICAL PROPERTIES | |
| Appearance: | White Powder |
| pH @ 1% solution: | 9.7 |
| Odor: | Fresh Scent |
| Foaming action: | Low foaming |
| Solubility in water: | Complete |
| Rinsing action: | Excellent |
| Metal Safety: | All Metals |
| Flash point: | None |
| Specific Gravity: | 1.04 |
| Stability: | Stable |
HANDLING & STORAGE
This product does not pose any fire hazards. Use good industrial hygiene practices such as wearing rubber gloves and an impermeable apron to protect sensitive skin. Chemical safety goggles should be worn to protect eyes. If eye contact occurs, flush with plenty of water for at least 15 minutes and consult a physician. In case of skin
contact, wash with soap and water, removing contaminated clothing and shoes. Keep product containers tightly closed when not in use. Store in the original container between 45° and 85°F. When stored as above, shelf life is a minimum of 2 years.
SC75 CLEANING CONCENTRATE
SC75 is a concentrated semi-aqueous, micro-emulsion solution. It can be used as a pre-wash chemical to remove oil, grease, corrosion and rust, and residue from metal parts. Also, SC75 is an excellent choice for removing heavy oil and water-based paints, ink, and adhesives.
This product has proven itself in hundreds of applications, by removing powder coatings, e-coatings, epoxy systems, oil & water based paints, adhesives, inks and petroleum based products. Terpentine products will not harm alloys such as steel, aluminum, copper, magnesium, brass, and most plastic substrates.
Applications:
| Physical Properties | |
| Appearance: | Blue Liquid |
| pH @ 1% solution: | 3.5 |
| Odor: | Mild |
| Foaming action: | Controlled |
| Solubility in water: | Complete |
| Rinsing action: | Excellent |
| Metal Safety: | All Metals |
| Flash point: | None |
| Specific Gravity: | 1.073 |
| Stability: | Stable |
HANDLING & STORAGE
This product does not pose any fire hazards. Use good industrial hygiene practices such as wearing rubber gloves and an impermeable apron to protect sensitive skin. Chemical safety goggles should be worn to protect eyes. If eye contact occurs, flush with plenty of water for at least 15 minutes and consult a physician. In case of skin
contact, wash with soap and water, removing contaminated clothing and shoes. Keep product containers tightly closed when not in use. Store in the original container between 45° and 85°F. When stored as above, shelf life is a minimum of 2 years.
MSDS:
Refer
to our Material Safety Data Sheet for additional
information
Customer Service and Sales: 248-340-0342
Gun Lubricant for Use in Ultrasonic Lubrication
This lubricant was formulated especially for use on automatic, rapid-fire, and repetitive shooting firearms, black powder, shotguns, riffles and pistols. It greatly decreases friction, which reduces heat and wearing of the gun. It has passed many tests (see table below)
Features:
Ultrasonic Cleaner Specifications:
| Test Performed | ASTM Standard | Results | Min. | Max. |
| Flash Point COC | D92-97 | 390°F | ||
| Auto Ignition | D2155 | 555°F | ||
| Pour Pont | D97 | < -60°F | ||
| Viscosity | D445 | 2167 @ -40°C (cSt) | 9.0 | 14 |
| Salt Spray Corrosion | B-117 | 150 hours | Pass | Pass |
| Four-Ball Wear Test | D4172 | 0.56 | 0.8 | |
| Falex Pin & V-block | D5620 | No Seizure 750 lb. | 60 sec. | 500 sec. |
Shotgun Users Will See the Following:
Automatic and Rapid Firearm Users Will See the Following:
Don't Forget Ultrasonic Cleaning/Degreasing Solution!
1 Gallon Ultrasonic Cleaning/Degreasing Solution − Removes dirt, carbon, and grease from even the hardest places to reach by hand! Dilutes to 5+ gallons! You can order this gun cleaning/degreasing solution at a great value by using the Options box next to the "Add to Cart" box below.
Customer Service and Sales: (248)-340-0342
Ultrasonic Gun Cleaning Solution
This cleaner will cut through the toughest cosmoline, carbon, grease and grime! Its super strength allows it to degum and degunk the dirtiest of gun parts when used in ultrasonic gun cleaning machines! It has been thoroughly tested in the field and shops. Hands-on Gunsmiths and Armors praise how quickly it dissolves in warm water, how well it works in both hard and soft water, and how freely it rinses to leave parts bare-metal bright.
Applications:
Features:
Don't Forget Ultrasonic Gun Lubricant!
1 Gallon Ultrasonic Gun Lubricant − Environmentally safe lubricant protects guns from rust and reduces friction to increase shooting distance and prevent the gun from jamming! You can order this gun cleaning/degreasing solution at a great value by using the Options box next to the "Add to Cart" box below.
Customer Service and Sales:(248)-340-0342
Shellac Buster Never Dies!When you need to remove hard buildups of varnish, shellac, rust, oil, paint, grease, dirt and grime in half the time of other formulas, SharperTek’s Shellac Buster ultrasonic cleaning solution fits the bill! Shellac-Buster is a concentrated semi-aqueous, micro-emulsion solution that can be used as a pre-wash and is an excellent choice for removing heavy oil and water-based paints, ink, and adhesives. And as an added benefit, Shellac Buster never dies:
Shellac Buster Keeps on going! If you’re one of the many Small engine shops, vintage car repair facilities or motor cycle mechanics who are constantly running into tough to clean carburetor parts, then SharperTek’s Shellac Buster formula in your system will get you spending your time doing what really matters to your customers: fixing, rather than cleaning. Brian Sims, chief mechanic and owner of Manx Motors in Auburn hills Michigan, let us know how SharperTek’s Shellac Buster really helps him with tough to clean carburetors. According to Brian, since the addition of ethanol to the nations fuel supply, fuel system problems in engines have been on the rise. “Nearly eighty percent of the machines we are servicing today are being serviced because of fuel system issues.” Says Brain. “Ethanol can really make a mess out of a carburetion system.” Brian added. Ethanol, often made from corn sugars, is a colorless alcohol fuel that makes up 10 percent of the product dispensed at gasoline pumps. Ethanol tends to attract moisture over time, and this messes with small engine fuel systems like snow blowers and lawn mowers as well as the fuel systems in the engines of motorcycles and vintage cars. If gas is left in the machine too long, the carburetors get clogged with a crusty film that must be cleaned out, and in some cases the carburetor must be replaced entirely. ”The fuel goes bad quickly. It turns into varnish and shellac in the carburetor and the Shellac-Buster does a great job in cleaning it.” Brian said. “If left over a long period, gasoline, oil and ethanol will start separating from one another in the gas tank and the whole carburetor body of a smaller motor will start corroding. With oil sinking to the bottom, the engine may not get proper lubrication.” Brian added. The Sharpertek’s Shellac-Buster has proven itself in hundreds of applications. Shellac Buster excels at removing powder coatings, e-coatings, epoxy systems, oil & water based paints, adhesives, inks and petroleum based products. Turpentine products will not harm alloys such as steel, aluminum, copper, magnesium, brass, and most plastic substrates and rubber. Applications:
|
